Toro 5000 Series RD 60" 25HP EFI 747cc (74943)

$13,777.00


Availability
Brochure
Manufacturer
Toro
Model
5000 Series RD 60" 25HP EFI 747cc (74943)

Overview

Description

Z Master Professional 5000 Series mowers offer rear discharge decks for increased productivity in taller grass. These EFI models also use up to 25% less fuel than equivalent non-EFI mowers. The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds. Clippings are dropped within the path of the mower, saving time and cleanup.

Highlights
  • 25 HP (20 kw) Kohler® Command Pro® EFI 747cc Engine
  • The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds.
  • 60" (152.4 cm) TURBO FORCE deck
  • EFI Fuel Efficiency - Kohler's closed-loop EFI design improves fuel efficiency by up to 25 percent.
Features
  • 7-Gauge, High-Strength Steel: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • Industry's Toughest Spindle Assemblies: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models. 72" Deck will have tapered bearing only.
  • Deluxe Suspension Seat: Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
  • A Flat Crisp Cut with Precision Blades: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • Smarter design in a bull-nose bumper.: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • Smooth, Powerful Response:
  • Operator Information Center:
  • Folding Rollover Protection System ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Specifications
  • Engine: 25 HP* (20 kw) Kohler® Command Pro EFI 747cc
  • Fuel Capacity: Gas/12 gal (45.4 L)
  • Cutting Width: 60" (152.4 cm)
  • Adjustable Discharge Baffle: Standard
  • Air Filter: Heavy-Duty Canister Air Cleaner
  • Armrests: Standard
  • Blade Tip Speed: 18,500+ ft/min (5638.8 m/min)
  • Blade Type: .25 in (.6 cm) thick heat-treated steel
  • Carrier Frame: 3" x 1.5" x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
  • Caster Tires: 13" X 6.5" - 6" (33 cm x 16.5 cm - 15.2 cm) Flat-Free Semi-Pneumatic
  • Clutch: Electromagnetic
  • Cup Holder: Standard
  • Deck Design: 7-gauge 60" (152.4 cm) TURBO FORCE® Rear Discharge w/ bull-nose bumper
  • Discharge Chute: Rubber
  • Drive System: Unitized Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)
  • Drive Tires: 24" x 12" - 12" (61 cm x 30.5 cm - 30.5 cm)
  • Ground Speed: 10 mph forward (16.1 kph)
  • Height of Cut: 1 in - 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments
  • Number of Blades: 3
  • Hour Meter: Standard
  • Hydraulic Fluid: Premium synthetic
  • Ignition: Electric
  • ROPS: Folding; standard
  • Seat: Deluxe Suspension with 3-D isolation mounts
  • Spindle Bearings: Maintenance-Free
  • Spindle Housing: 9" (22.9 cm) diameter cast iron
  • Steering Controls: 1-5/8" (4.1 cm) diameter grips; adjustable, dampened
  • Weight: 1,271 lbs. (576.5 kg)
Attachments
  • E-Z Vac™ DFS Collection System: Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat! Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 8.3 cu. ft. capacity (6.7 bushels). L 48" deck - 103.2" (262.0 cm)W 48" deck - 63.9" (162.3 cm)> L 52" deck - 103.2" (262.0 cm)W52" deck - 67.8" (172.1 cm) Deck-mounted, spindle-driven fan; Dump-From-the-Seat, commercial- grade steel and polyethylene hopper; 13.7 cu. ft. capacity (11 bushels). L 60" deck - 107.1" (271..9 cm)W 60" deck - 75.2" (191.1 cm) L72" deck - 110.2" (281.3 cm)W 72" deck - 87.2" (221.1 cm) NOTE: Length & width measurements are as installed.
  • E-Z Vac Twin & Triple Bagger Systems: These baggers deliver the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge. E-Z VAC TWIN BAGGER Deck-mounted, spindle-driven fan; 2 commercial-grade mesh bags with reinforced front and bottom; 10 cu. ft. capacity (8 bushels). L 48" deck - 102.3" (259.8 cm)W 48" deck - 63.8" (162.1 cm) L 52" deck - 102.3" (259.8 cm)W 52" deck - 67.7" (172.0 cm) E-Z VAC TRIPLE BAGGER Deck-mounted, spindle-driven fan; 3 commercial-grade mesh bags with reinforced front and bottom; 16.7 cu. ft. capacity (13.4 bushels). L 60" deck - 106.1" (271.9 cm)W 60" deck - 75.2" (191.1 cm) L 72" deck - 109.3" (279.1 cm)W 72" deck - 87.2" (563.9 cm) NOTE: Length & width measurements are as installed.
  • Light Kit: The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit. Part # 107-9880 - 7000 Series and Z100-Z500 Part # 116-1154 - G3 and 3000/5000/6000 Series Part # 130-8469 - 8000 Series Direct Collect Z Part # 114-3505 - All Grandstands (2015 models and prior) Part # 133-1437 - All Grandstands (2016 models) Part # 133-1495 - All Grandstands (2016 models)
  • Optional Blades: In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • Recycler® Mulching Kits: Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.
  • Toro Z Stand™: Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck. Part # 105-1622 Z Stand Kit - Z200, Z500, 7000 Series Part # 117-0354 Z Stand Kit - 72" 5000/6000 Series (Excludes Rear Discharge 74944) Part # 121-4811 Z Stand Kit - 48"-60" 2000/3000/5000/6000 Series
  • Roller Striping Kit: Roller striping kit is easily installed and provides a premium "ball park" after-cut appearance.
NOTES:
*The gross horsepower of these engines was laboratory rated by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Specs

Engine

Engine Manufacturer
Kohler®
Horse Power
25 hp (20 kw)
Engine Type
Command Pro EFI

General

Transmission
Unitized Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)
Wheel Size
24 in. x 12 in. - 12 in. (61 cm x 30.5 cm - 30.5 cm)
Fuel Capacity
12 gal. (45.4 L)

Deck

Deck Size
60 in. (152.4 cm)

Promotions








Related Products