2017 Toro 5000 Series Rear 60" 25 HP EFI 747cc (74943)

$13,777.00


Model Shown 74942

Model Shown 74942

Availability
Brochure
Year
2017
Manufacturer
Toro
Model
5000 Series Rear 60" 25 HP EFI 747cc (74943)

Overview

Description

Z Master Professional 5000 Series mowers offer rear discharge decks for increased productivity in taller grass. These EFI models also use up to 25% less fuel than equivalent non-EFI mowers. The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds. Clippings are dropped within the path of the mower, saving time and cleanup.

  • 25 HP (20 kw) Kohler® Command Pro® EFI 747cc Engine
  • 60" (152.4 cm) TURBO FORCE deck
  • The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds.
  • EFI Fuel Efficiency - Kohler’s closed-loop EFI design improves fuel efficiency by up to 25 percent.
Features
  • 7-Gauge, High-Strength Steel: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • Industry's Toughest Spindle Assemblies: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models. 72" Deck will have tapered bearing only.
  • A Flat Crisp Cut with Precision Blades: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • Deluxe Suspension Seat: Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
  • Smarter design in a bull-nose bumper.: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • Smooth, Powerful Response: The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
  • Operator Information Center: The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
  • Folding Rollover Protection System ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Specifications
  • Engine: 25 hp* (20 kw) Kohler® Command Pro EFI 747cc
  • Fuel Capacity: Gas/12 gal. (45.4 L)
  • Cutting Width: 60 in. (152.4 cm)
  • Adjustable Discharge Baffle: Standard
  • Air Filter: Heavy-Duty Canister Air Cleaner
  • Armrests: Standard
  • Blade Tip Speed: 18,500+ ft/min (5638.8 m/min)
  • Blade Type: .25 in (.6 cm) thick heat-treated steel
  • Carrier Frame: 3 in. x 1.5 in. x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
  • Caster Tires: 13 in. x 6.5 in. – 6 in. (33 cm x 16.5 cm – 15.2 cm) Flat-Free Semi-Pneumatic
  • Clutch: Electromagnetic
  • Cup Holder: Standard
  • Deck Design: 7-gauge 60 in. (152.4 cm) TURBO FORCE® Rear Discharge w/ bull-nose bumper
  • Discharge Chute: Rubber
  • Drive System: Unitized Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)
  • Drive Tires: 24 in. x 12 in. – 12 in. (61 cm x 30.5 cm – 30.5 cm)
  • Ground Speed: 10 mph forward (16.1 kph)
  • Height of Cut: 1 in - 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments
  • Number of Blades: 3
  • Hour Meter: Standard
  • Hydraulic Fluid: Premium synthetic
  • Ignition: Electric
  • ROPS: Folding; standard
  • Seat: Deluxe Suspension with 3-D isolation mounts
  • Spindle Bearings: Maintenance-Free
  • Spindle Housing: 9 in. (22.9 cm) diameter cast iron
  • Steering Controls: 1-5/8 in. (4.1 cm) diameter grips; adjustable, dampened
  • Weight: 1,271 lb. (576.5 kg)
Accessories
  • E-Z Vac™ DFS Collection System: Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools.The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!
  • E-Z Vac Twin & Triple Bagger Systems: These baggers deliver the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.
  • Light Kit: The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.
  • Optional Blades: In addition to the high sail blade, which comes standard on Z Master® Z590 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • Recycler® Mulching Kits: Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*. (*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.)
  • Roller Striping Kit: Roller striping kit is easily installed and provides a premium "ball park" after-cut appearance.
  • Toro Z Stand™: Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.
NOTES:
The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Specs

Engine

Engine Manufacturer
Kohler®
Horse Power
25 hp (20 kW)
Engine Type
Command Pro EFI
Displacement
747cc

General

Wheel Size
Caster Tires: 13 in. x 6.5 in. – 6 in. (33 cm x 16.5 cm – 15.2 cm); Drive Tires: 24 in. x 12 in. – 12 in. (61 cm x 30.5 cm – 30.5 cm)
Fuel Capacity
12 gal. (45.4 L)

Deck

Deck Size
60 in. (152.4 cm)
Discharge Type
Rear; Optional: Mulch

Promotions










Related Products