2019 Land Pride RCF3672

Call for Price

Land Pride



Our RCF36 Series Rotary Cutter is a Brute!.

This cutter features a 190 HP gearbox capable of many land clearing tasks including heavy grass and weeds, row crop stubble, thick brush, and small trees up to 4" in diameter. Features Replaceable skid shoes, Smooth top design, All welded deck, Reinforced rear chain guard, Heavy-duty tailwheel mount, Floating top hitch.

  • Surpassed rugged industry standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 5 Year gearbox warranty: A rugged heavy built gearbox capable of handling heavy cutting applications. Shows Land Pride’s confidence in gearbox integrity.
  • 190 Horsepower gearbox: A rugged heavy built gearbox capable of handling heavy cutting applications.
  • Cat. 5 driveline with 4-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
  • Dual position clevis type 3-Point floating top link: Permits deck to follow the terrain for an even cut. Additional set of holes for tractors with shorter top links.
  • Lower clevis type 3-Point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Heavy deck construction with 3/16" deck top & 1/4" side skits: Strong heavy deck material for rugged use.
  • Box tubing deck supports: Makes for a stronger rigid deck.
  • Fully welded deck: Adds additional strength.
  • Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • 13 3/8" Deck height: Allows cutter to handle heavy cutting conditions.
  • 2" to 12" Cutting height: Provides for a wide range of cutting conditions.
  • High cutting capacity: Can cut brushy areas with saplings up to 4".
  • Skid shoes: Provides sidewall reinforcement and protection to bottom of sidewall.
  • 1/2" x 4" Heat-treated free swinging blades Free swinging protects from obstructions. Heat-treated offers longer life.
  • Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • 3/16" Plate stump jumper: Standard round stump jumper slides over stumps, rocks, and debris.
  • High blade tip speed: 14,861 fpm Ensures clean cut.
  • 15"Laminated tailwheel: Laminated material is long lasting in rough conditions and can’t go flat.
  • 1 1/2" Heavy-duty spindle on tailwheel: Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
  • Optional guarding: Protect against flying debris. Customer can choose to include single chain, double chain or rubber guarding on the front and single chain or double chain guarding on the back.
  • Model Number: RCF3672
  • Machine weight: 1337 lbs (606.5 kg) With front and rear single chain guards
  • Hitch Category: l or II with floating clevis top link, quick hitch adaptable
  • Cutting width: 72" (1.83 m)
  • Overall width: 78 1/2" (1.99 m)
  • Overall length :124 3/4" (3.17 m)
  • Deck height (Bottom of deck to bottom of skid shoe): 13 3/8" (34.0 cm)
  • Cutting height: 2" to 12" (5.1 cm to 30.5 cm)
  • Cutting capacity: 4" (10.2 cm) Diameter
  • Recommended tractor hp: 60-190 hp (44.7-141.7 kw)
  • Power take-off speed: 540 rpm
  • Gearbox: 1:1.48 Speed-up beveled gears, Cast iron housing, 1 3/4" (4.4 cm) - 20 spline input shaft and 2 3/8" (6.0 cm) output shaft
  • Gearbox lubricant: EP 80-90W oil
  • Gearbox oil capacity: 10 pints (4.73 L)
  • Deck construction: All welded deck
  • Deck material thickness: 3/16" (5 mm)
  • Side skirt material thickness: 1/4" (6 mm)
  • Skid construction: Replaceable bolt on skid shoes
  • Stump jumper: Round pan 3/16" x 30 7/16" (5 mm x 77.3 cm) with blade holder bar
  • Blades (2): 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated alloy steel Free-swinging high lift - low friction
  • Blade bolts: Keyed with harden flat washers & locknuts.
  • Blade tip speed: 14,861 fpm (75.5 mps)
  • Driveline: ASAE Category 5 with 4-plate slip clutch
  • Driveline protection: Center bolt 4 plate slip clutch
  • Tailwheel mount assembly: Welded A-arm and caster fork with 360 degree swivel
  • Tailwheel: 4" x 8" x 15" Laminated tire with cast iron hub
  • Front guard: (optional) Rubber belting or single chain guard or double chain guard
  • Rear guard: (optional) Single chain guard or double chain guard



Working Width
72 in. (1.83 m)
78 1/2 in. (1.83 m)
124 3/4 in. (3.17 m)
1337 lb. (606.5 kg)
Recommended HP
60-190 hp (44.7-141.7 kw)

Related Products

Value Your Trade in 30 Seconds